Coleman Electrical Service handles residential and commercial electrical work across Sun Valley and the surrounding San Fernando Valley. Whether you own a home, manage a rental property, or run a business, we're ready to troubleshoot what's wrong, upgrade what's outdated, and wire what's new. Same-day appointments are often available, and we're reachable every day of the week. Fast diagnosis. Honest pricing. Clean work.
Work is carried out by licensed electricians who know what California code requires and what Sun Valley's older and newer housing stock actually needs. Call for a quote and we'll get you a price before anything is scheduled.
Dealing with a tripping breaker or a dead outlet? Those symptoms are worth taking seriously. A breaker that trips repeatedly, an outlet that stopped working, lights that flicker when an appliance kicks on, or a burning smell near a switch plate can all point to something that needs attention before it becomes a bigger problem.
When we come out, we trace the issue from the symptom back to the source. That might mean checking the panel for a failing breaker, testing outlets for proper grounding, or looking for loose connections that cause arcing. We install GFCI and AFCI protection where it's required by code and where it adds a genuine layer of safety. If a circuit has lost power in one room, we find out why rather than guessing.
The work is carried out by licensed electricians who approach every call the same way: identify the real problem, explain what it takes to fix it, and do the job correctly. We keep your home powered and safe.
Sun Valley has a mix of housing stock, and a lot of it was built when electrical demand was a fraction of what a typical household or business draws today. If your panel is full, running on a 100-amp service, or flagged during a home inspection, it may be time to upgrade.
We handle panel replacements, 200-amp service upgrades, subpanel installation, and service-entrance and meter upgrades. Before any of that work begins, we run a load calculation to make sure the new equipment can carry what you're asking of it. Grounding and bonding get done correctly as part of the job, not as an afterthought.
Code-compliant wiring on every job is how we approach every panel project, whether it's a straightforward swap or a full service upgrade on a home that's being renovated and put on the market. We'll handle the wiring so you don't have to.
Getting your power back is easier than you think, whether that means adding an outlet where there isn't one, replacing a switch that's stopped working, or upgrading your lighting to something that actually works for the space.
We install GFCI outlets in kitchens, bathrooms, garages, and exterior locations where moisture is a factor. We run dedicated circuits for dryers, electric ranges, and hot tubs that need their own breaker and their own wire run. For lighting, we handle recessed and LED installations, kitchen and bathroom lighting, garage lighting, and exterior and security lighting. Landscape lighting circuits are part of what we do as well.
Ceiling fan installation is a common call, and we handle everything from swapping an old fan for a new one to running a new circuit where no wiring exists yet. When we look at a job, we give honest recommendations on repairs, never an upsell. Reach out and an electrician will follow up.
Southern California has some of the highest EV adoption in the country, widespread rooftop solar, and a power grid that gets strained every wildfire season. The three services below come up constantly in this area, and we're set up to handle all of them on the electrical side.
California's EV adoption rate means more Sun Valley households are parking an electric vehicle in the garage and realizing that a standard 120-volt outlet charges too slowly to be practical. A Level 2 charger runs on a dedicated 240-volt circuit and cuts overnight charging time significantly. We check the panel's available capacity, run the dedicated circuit, and install the charger in the right location. If the panel needs room to support the new circuit, we handle that as part of the same project.
If you're adding a solar array or a battery storage system, the electrical infrastructure behind it matters as much as the equipment itself. We handle the wiring, circuits, panel capacity work, transfer switch installation, and interconnection wiring that allows a battery backup to carry your critical loads when the grid goes down. Public-safety power shutoffs during wildfire season have made this a real concern across Los Angeles County, and the right electrical setup is what makes a battery system actually useful when the power cuts out.
A single voltage spike from the utility grid or a nearby lightning strike can damage appliances, electronics, HVAC circuits, and the EV charger circuit you just had installed. A whole-home surge protector installs at the panel and intercepts that spike before it reaches your devices. Grounding and bonding are part of getting it right. It's a straightforward installation that protects a lot of expensive equipment for a reasonable cost. Pick up the phone and we'll get rolling.
We've handled everything from a flickering light to a full rewire, and the customers we work with cover a wide range. Homeowners call us for repairs, panel upgrades, and renovation wiring. Landlords and property managers call when a rental unit needs an electrical safety inspection, a code compliance review before a new tenant moves in, or a repair that a home inspector flagged. Small business owners, commercial tenants, and property managers call for office wiring, retail buildouts, and restaurant wiring that has to meet commercial code.
We also handle pre-sale electrical inspections for homeowners who want to know what's going to come up before the buyer's inspector finds it. For older Sun Valley properties with aluminum wiring or knob-and-tube wiring still in place, we can walk through what remediation looks like and what it actually involves.
We show up, and we keep you posted until the job is done. We'll handle the wiring so you don't have to.
Electrical problems don't wait, and neither do we, especially when the wiring itself is the problem. Older Sun Valley homes can have knob-and-tube wiring that was never designed for modern loads, aluminum branch-circuit wiring that creates connection problems over time, or panels that were undersized from the start. We handle whole-home rewiring, partial rewires for additions and remodels, and targeted replacement of wiring that's been flagged as a hazard.
For renovation projects, we wire new additions, garages, sheds, and converted spaces so the electrical side of the project meets current California code. That includes load calculations, new circuits, and making sure the panel can support what's being added.
We test every circuit. We label every breaker. We leave it safe.
Not every electrician works the same way, and scheduling matters when something in your home or business stops working. We're available every day from 6:00 AM to 10:00 PM, including weekends. Same-day service is often available, though we can't guarantee a specific arrival window.
When the issue is urgent, such as a sparking outlet, a burning smell near a panel, or a complete loss of power in part of the building, let us know when you call. Those situations get priority attention. We confirm the details when you reach us and get someone headed your way as soon as the schedule allows.
Reach out and an electrician will follow up.
When you call, you get a price before anything is scheduled. We explain what the job involves, what the rate covers, and what to expect from the visit. Pricing is straightforward and explained up front. If you have questions about what's included, ask on the call and you'll get a straight answer.
We give honest recommendations on repairs, never an upsell. If a repair is the right answer, that's what we'll recommend. If the wiring or equipment genuinely needs to be replaced, we'll tell you why and what it involves. You make the call from there.
A whole-home surge protector installs at the main panel and intercepts voltage spikes from the utility grid before they reach your appliances, electronics, and circuits. In the Los Angeles area, where public-safety power shutoffs and grid restoration events are a recurring reality, it protects a significant amount of equipment for a straightforward installation cost. We check grounding and bonding as part of the installation, because the protector works best when the grounding system behind it is solid.
That depends on the age and condition of the wiring, what the home is being used for, and what the inspection turns up. A home with knob-and-tube wiring throughout that is being heavily loaded or insulated is a different situation from a home where only one circuit has a problem. We assess what is actually there before recommending a scope.
Same-day service is often available when you call between 6:00 AM and 10:00 PM. For situations involving a sparking outlet, a burning smell near a panel, or a complete loss of power, let us know when you call and we will prioritize accordingly. We confirm timing on the call.
We look at the breaker condition, whether breakers are properly sized for their circuits, grounding and bonding connections, signs of overheating or corrosion, and whether the panel has adequate capacity for the current load. If a subpanel is involved, that gets checked as well.
We test outlets for proper wiring and grounding, check GFCI and AFCI protection in required locations, look for signs of loose connections or arcing at switches and fixtures, and trace any circuits that are showing symptoms. The goal is to find the source of the problem rather than address only the visible symptom.
For most wiring, panel, and circuit work, yes. Working on live circuits is a safety risk, and most electrical repairs and installations require the relevant circuit or the main service to be de-energized. We let you know in advance which parts of the home will be without power and for approximately how long.
If the job turns out to be more involved than the initial call suggested, such as wiring that is harder to access than expected or a related problem discovered during the work, we tell you before continuing and confirm the revised price. We do not add charges after the fact without your knowledge.
Wiring that runs through finished walls, attic spaces, or areas that have been built over is harder to access and trace than wiring in an unfinished space. Older homes in Sun Valley may also have wiring that was modified or extended at various points over the decades, which can make the actual circuit layout different from what the panel suggests.
We test every circuit that was worked on, verify that outlets and fixtures are functioning correctly, check that breakers are labeled accurately, and confirm that GFCI and AFCI protection is operating as required. We test every circuit. We label every breaker. We leave it safe.
Yes. You get a clear account of what was found, what was done, and what circuits or devices were involved. For inspection work, a written summary of findings is part of what you receive.
When a repair or upgrade requires bringing older wiring or devices up to current California code, we address that as part of the job rather than leaving code deficiencies in place. We explain what needs to be corrected and why before any work begins.
A straightforward repair or outlet installation may take an hour or two. A panel replacement or service upgrade typically takes most of a day. Whole-home rewiring is a multi-day project. We give you a realistic time estimate on the call based on what you have described.
Replacing a light bulb or resetting a tripped breaker is within most homeowners' ability. Anything that involves opening a panel, replacing wiring, adding a circuit, or working inside a switch or outlet box is work that should be handled by a licensed electrician. Wiring mistakes can create fire and shock hazards that are not always immediately visible.
Coleman Electrical Service is ready to help with repairs, panel work, rewiring, EV charger installation, and everything in between. Fast diagnosis. Honest pricing. Clean work.
Call (747) 368-2289 for a quote or to schedule service. We're available every day from 6:00 AM to 10:00 PM, and same-day appointments are often available.
Below is a plain-language look at the electrical services we handle across Sun Valley and the surrounding San Fernando Valley. Each row covers what the service includes, who it fits best, and a practical note to help you figure out where to start. Call for a quote and we will walk you through the details before anything is scheduled.
| Service Type | Scope of Work | Best For | Things to Know |
|---|---|---|---|
| Hot-Tub Circuits | 240-volt dedicated circuit, GFCI disconnect installation, outdoor wiring and conduit, bonding and grounding | Homeowners installing a spa or hot tub and needing the electrical side handled correctly | Hot tub wiring involves specific code requirements for GFCI protection and bonding. Getting it right the first time avoids problems at inspection. |
| Breaker & Fuse Repair | failing breaker replacement, fuse panel evaluation, overcurrent protection checks, panel interior inspection | Homeowners with a breaker that trips repeatedly or will not reset | A breaker that keeps tripping is doing its job, but the underlying cause still needs to be found and corrected. |
| Standby Battery for Outages | battery backup wiring, transfer switch installation, critical load panel setup, grid-tie and off-grid configurations | Homeowners who want power for essential circuits when the grid goes down | Sizing the battery correctly starts with knowing which circuits you need to keep running. We work through that on the call before anything is scheduled. |
| Electrical Repairs & Troubleshooting | tracing faults to the source, testing outlets and circuits, arcing and loose connection repair, GFCI and AFCI protection | Any home or business with a symptom that needs a diagnosis | A tripping breaker or dead outlet can point to something deeper. We identify the real problem before recommending a fix. |
| Outlet & Switch Installation | GFCI outlet installation, switch replacement and upgrade, dedicated outlet runs, exterior and weatherproof outlets | Homeowners adding outlets or replacing devices that have stopped working | GFCI protection is required by California code in kitchens, bathrooms, garages, and outdoor locations. We install to current code on every job. |
| Older-Home Rewiring | knob-and-tube replacement, aluminum branch-circuit remediation, partial and whole-home rewires, wiring for additions and remodels | Owners of older Sun Valley properties with wiring that has been flagged or is showing symptoms | The scope of a rewire depends on what is actually in the walls. We assess the existing wiring before recommending a full or partial approach. |
| Whole-Home Surge Protection | panel-mounted surge protector installation, grounding and bonding verification, protection for appliances and electronics, EV charger circuit protection | Any home with sensitive electronics, an EV charger, or solar equipment worth protecting | A surge protector at the panel intercepts voltage spikes before they reach your devices. Grounding and bonding are checked as part of the installation. |
| Wiring & Circuit Installation | new circuit runs, renovation and addition wiring, garage and shed wiring, code-compliant rough-in work | Additions, conversions, and any space being built out or rewired | New wiring in California is inspected to code. We handle the load calculation and panel capacity check as part of the project. |
| Electrical Panel & Service UpgradesMost Popular | 200-amp service upgrades, panel replacement, subpanel installation, load calculations and grounding | Older homes, properties under renovation, or any panel flagged during an inspection | Many Sun Valley homes were built with 100-amp service. A load calculation before the upgrade confirms the new panel can carry what you are adding. |
| Electrical Safety Inspections | panel and wiring condition review, GFCI and AFCI check, grounding and bonding evaluation, pre-sale and rental unit inspections | Landlords, buyers, sellers, and anyone with an older property | A written summary of findings comes with every inspection so you know exactly what was found and what, if anything, needs attention. |
| Dedicated Appliance Circuits | dryer and range circuits, hot tub and spa wiring, workshop and garage circuits, disconnect and breaker installation | Any high-draw appliance that needs its own breaker and wire run | Running a dedicated circuit means the appliance does not compete with other loads on the same breaker, which reduces nuisance tripping and wear. |
| Lighting Installation | recessed and LED lighting, kitchen and bathroom lighting, exterior and security lighting, landscape lighting circuits | Remodels, new construction, or any space where the existing lighting is not working for the room | Exterior and landscape lighting circuits need proper weatherproofing and grounding. We handle the circuit run, not just the fixture. |
| Solar & Battery Backup | transfer switch installation, battery backup wiring, panel capacity and interconnection work, critical load circuit setup | Homeowners adding solar or battery storage, especially ahead of wildfire season outages | Public-safety power shutoffs across Los Angeles County have made battery backup a practical choice. We handle the electrical side so the system actually works when the grid goes down. |
| Ceiling Fan Installation | fan and fixture swap, new circuit and wiring runs, box and brace installation, switch and remote wiring | Homeowners replacing an old fan or adding one where no wiring exists | If there is no existing wiring at the ceiling location, we run the circuit from the panel. No guesswork on whether the box can hold the weight. |
| EV Charger Installation | Level 2 charger installation, dedicated 240-volt circuit, panel capacity check, garage and driveway placement | Electric vehicle owners who need faster overnight charging than a standard outlet provides | California has some of the highest EV adoption in the country. If the panel needs room for the new circuit, we handle that as part of the same visit. |
What are the signs that a home is ready for an electrical panel or service upgrade?
The clearest signs are a panel that is full with no open slots, a 100-amp service feeding a home with modern loads, breakers that trip under normal use, or a panel that was flagged during a home inspection. Older fuse-based panels are another common reason to upgrade. We run a load calculation before any upgrade to make sure the new panel can carry what the home actually draws.
What does it mean when lights flicker or dim when an appliance turns on?
Flickering or dimming when a large appliance kicks on usually means the circuit is being overloaded momentarily, or that the wiring feeding those devices is undersized for the load. It can also point to a loose connection at the panel or along the circuit. We trace the symptom back to the source rather than treating it as a cosmetic issue.
Is a warm outlet or a buzzing switch something to worry about?
Yes. A warm outlet or a switch that buzzes, crackles, or sparks is a sign of a loose connection, a failing device, or a circuit that is being overloaded. Those conditions can cause arcing, which is a fire risk. Turn off the circuit if you can and call us. We check the device, the wiring behind it, and the circuit feeding it.
Work Performed by Licensed Electricians on Every Call
Every job, from a single outlet to a full panel upgrade, is handled by licensed electricians who know what California code requires and what Sun Valley's housing stock actually presents.
What are the electrical requirements for an EV charger installation?
A Level 2 EV charger runs on a dedicated 240-volt circuit, typically a 50-amp circuit depending on the charger model. The panel needs to have enough available capacity to support the new breaker. If the panel is full or running close to its limit, we address that as part of the same project. We check the panel first, run the circuit, and install the charger in the right location for the vehicle setup.
How does aluminum wiring or knob-and-tube wiring affect a home's safety?
Knob-and-tube wiring was not designed for modern electrical loads and lacks a ground conductor. It can also be a problem when insulation has been blown over it, which traps heat. Aluminum branch-circuit wiring from the 1960s and 70s expands and contracts differently than copper, which can loosen connections over time and create arcing hazards. Neither is an automatic emergency, but both are worth having assessed. We look at what is actually in the home before recommending a scope of work.
Do I need to be home when the electrician comes out?
For most work inside the home, yes. Someone needs to be present to provide access to the panel, the rooms being worked on, and any areas the electrician needs to reach. For exterior work only, we can discuss access arrangements on the call. We confirm what is needed when you schedule.
Scope Agreed Before the Panel Is Opened
We explain what the job involves and confirm the price before any work begins. If something changes once we are on site, we tell you before continuing.
How does pricing work, and when do I find out what the job will cost?
You get a price on the phone before anything is scheduled. We ask about the job, explain what the work involves, and give you the rate before we send anyone out. If the job turns out to be more involved than the initial description suggested, we tell you before continuing and confirm the revised scope with you. Nothing is added after the fact without your knowledge.
What is GFCI protection and where is it required in a home?
A GFCI outlet or breaker monitors the current flowing through a circuit and shuts it off almost instantly if it detects an imbalance, which is what happens when current finds a path to ground through a person. California code requires GFCI protection in kitchens, bathrooms, garages, crawl spaces, unfinished basements, and outdoor locations. We install to current code and check existing GFCI devices for proper operation when we are on a job.
Experienced With Older and Newer Homes
Sun Valley has a wide range of housing, from postwar construction with aging wiring to newer builds adding EV chargers and solar. We handle both ends of that range and everything in between.
Can I add circuits for a workshop, garage, or new appliance without upgrading the panel?
It depends on whether the panel has open slots and enough available capacity to support the new load. We check both before running any new circuit. If the panel is at its limit, adding circuits without addressing capacity first creates an overloaded panel. We let you know what the panel can support and what options exist before any work begins.
What is involved in wiring a home for solar or battery backup?
On the electrical side, a solar or battery backup installation involves running the wiring between the solar equipment and the panel, installing a transfer switch or critical load panel, and making sure the panel has the capacity to handle the interconnection. We handle all of that. The solar panels and battery hardware themselves are separate from the electrical work we do, but the infrastructure that makes them function is exactly what we take care of.
How do I know if my home is ready to handle added electrical load, like an EV charger or a new appliance?
The starting point is a load calculation, which looks at what the panel is currently feeding and how much headroom is left. A 200-amp service with a half-full panel is in a different position than a 100-amp service that is already running near capacity. We run that calculation before recommending any upgrade or new circuit, so you know what the panel can actually support before anything is added.
Call (747) 368-2289 for a quote on any of the services above. We are available every day from 6:00 AM to 10:00 PM, and we will walk you through the details before anything is scheduled.
(747) 368-2289